WORKING
Check for every use:
- or the applia e does t sho sig s of da age.
- or the appliance still is fastened firmly. Mechanical bearing pressure, oscillating duet o
wind or rain could lead to loose.
- or there are no objects, canvas, sun screens etc. are inside the safety distances.
- or the socket you want to use gives the correct tension (220-240V-50Hz) and is
grounded.
If everything is all right you can insert the plug into the socket.
The Golden 2000 AMBER SMART Rotary has a remote control that works with two
batteries: AAA, 1.5V.
While using, point the remote control to the receiving point of the heater. If there are
obstacles between remote control and the heater, it will not work!
Press the on/off switch (5) on the side of the
unit to "I" (on); The blue light on the
reception point will go on.
Set the device into operation by pressing
the ON button of the remote control. The
light turns red. The de i e has a slo sta t
at 33% output. 4 seconds after starting, it
automatically switches to the most recently
used output. On first use, it will switch to
100% output after 4 seconds.
With the Ʌ-arrow, you can switch to a
higher heating level
With the V-arrow, you can switch to a lower
heating level
Pressing on the MAX button takes you
straight to the highest heating level.
To stop the unit, first press the 'off' button on the remote control. Then turn it off by
pressing the on/off-switch (5) to O off . Fi all , u plug it f o the all outlet. Allo
the heater to cool down.
Oscillation
Pressing the "oscillation symbol" (1) will make the
appliance oscillate from left to right, at an angle of
about 90°. Pressing the "stop oscillating symbol" (2)
will switch the function off. Before oscillating, check
that the terrace radiator will not radiate onto objects
or materials in the immediate vicinity!
Warning!
When you turn off the unit using only the remote control (or the app), the 'standby'
remains. So turn it off using the remote control (c.q. the app) or the on/off-switch and
remove the plug from the socket!
All manuals and user guides at all-guides.com
19