Spare Parts And Recommended Tools - L-Acoustics 12XT Manuel D'utilisation

13. Insert the head/plate assembly in the switch and lift the red tongue clockwise: the head is locked to the switch.
!
IMPORTANT
14. Insert the head/plate/switch assembly inside the enclosure and screw in the 2 hex screws.
!
CAUTION
15. Install the loudspeaker assembly in the enclosure and screw in the 8 hex screws with grower and standard
washers: into each hex screw insert a grower washer and then a standard washer (following this order)
and screw in the assembly to one of the eight locations.
16. Install the grill (logo oriented towards the active/passive switch) and screw in the 4 pozidrive screws
(pay attention for the tissue to slide along the inside of the cabinetry).
17. Put in place both rubber bands on the grill.
8.4

Spare parts and recommended tools

HS BC31
HP BC123
HS BC123
HR BC123
CC 115BHEAD
CC 115B
SE GR12XT
12XT_UM_ML_1.2
All manuals and user guides at all-guides.com
When locked, the head white mark must be oriented slightly counterclockwise from the
"4" mark on the switch, so as to properly couple both parts of the switch mechanism.
Orient the head white mark in the ACTIVE setting (see Section 6.2).
Table 7: Available spare parts
Diaphragm for 3'' driver – 8 Ω
12'' coaxial speaker – 8 Ω (including 3'' driver – 8 Ω)
12'' recone kit
12'' recone kit including labor
Active/passive switch head
Complete active/passive switch
Complete front assemble
Table 8: Recommended tools for service
Pliers
#2 pozidrive screwdriver
4 mm flat screwdriver
3 mm hex key
4 mm hex key
5 mm hex key
Medium strength threadlocker (blue)
w w w . l - a c o u s t i c s . c o m
EN
23 en