Mode Of Operation; Maintenance And Environmental Protection; Service Instructions - Meister MES 480 E Traduction Du Manuel D'utilisation Original

5457150-Exzentersc-man 06.02.14 07:42 Seite 41
9 – Mode of operation
Sanding
Position the entire sanding surface on
the piece of work.
Switch the machine on and guide it over
the surface to be sanded using circular
motions. Do not apply additional pressure
to the machine when sanding, the weight
of the machine itself is usually sufficient
to ensure optimum revolutions and a
good result. Do not tip! Complete several
sanding processes using sand paper that
gradually gets finer.
Polishing
Apply polish using a cross-coat method
and allow to dry slightly before
polishing. When you have completed
your work, reduce the pressure, lift the
machine from the piece you are working
on, and then switch the machine off.
10 – Maintenance and
environmental
protection
CAUTION! Before performing any
care or maintenance work,
disconnect from the power.
Use a dry brush to clean the dust
extraction openings (4). Clean the
housing with a damp cloth only - do not
use solvents! Then dry well. Remove the
dust collection bag from the plastic
section to empty. Empty carefully, try
not to create dust. Do not breathe in
saw dust! Wash out the bag in cold
soapy water and allow to dry.
Before each use, check the machine, the
cable and accessories to ensure that they
are not damaged. Have any necessary
All manuals and user guides at all-guides.com
repairs completed by a specialist.
Machines that no longer function properly
should be disposed off correctly in
accordance with the local regulations.
work should not be disposed of in the
household waste! They are to be
collected separately, in accordance
with the 2012/19 EU directive for the
disposal of electrical and
electronic waste, and
sent for proper and
environmentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
11 – Service instructions
• Store the machine, operating
• MeisterCRAFT devices are to a large
• MeisterCRAFT devices are subject to
CAUTION! Electrical and battery
operated units that no longer
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Please note additional hints given in
the operating instructions.
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
41