Meister MES 480 E Traduction Du Manuel D'utilisation Original page 39

5457150-Exzentersc-man 06.02.14 07:42 Seite 39
• When sanding, do not put excessive
pressure on the machine in order to
prevent the machine from coming to a
standstill.
• Secure the work piece to prevent it
from slipping by using tensioning
mechanisms.
• Make sure that cables always lead
away from the work place.
• During operation, always guide the
device with both hands and ensure
that you are standing firmly.
• The device should never be allowed
to get wet and should not be
operated in a damp environment.
• Prior to each use, check the device,
the cable and the plug. Any damages
should only be repaired by a specialist.
Only plug the device into the socket
when the machine is switched off.
• When carrying out work in which dust
is generated, wear a face mask and
safety goggles – do not smoke and
avoid naked flames.
• Use protective gloves.
• Wear ear-protectors.
• Wear safety goggles.
All manuals and user guides at all-guides.com
• Before carrying out any work on the
• Do not leave keys in the machine.
• Observe the general safety notes for
• Switch the device off and pull the plug
Type plate
Observe the technical specifications
detailed on the type plate! The
specifications have the following meanings:
MES 480 E
5457150
Bj.
SN
230 V~/50 Hz Voltage and frequency
480 W
n
0
14000 min
Meister Werkzeuge GmbH · Oberkamper Str. 37–39
machine, pull the plug out of the socket.
handling electrical tools.
out of the socket if the connection cable
is damaged. A damaged cable must be
replaced by the manufacturer or by their
customer service or a similarly qualified
person.
Model designation
Article number
Year of construction
Series number
Max. power consumption
: 4000–
-1
Revolutions in idle
Voluntary TÜV "geprüfte
Sicherheit" seal of quality
(tested safety)
CE mark (conformity with
European safety standards)
Do not dispose of with the
household waste!
Address of the manufacturer
D-42349 Wuppertal · Germany
39