BaByliss PRO ELIPSIS 3000 Mode D'emploi page 14

Straight and sleek
On clean, tangle-free and dry hair:
Step 1: divide hair into 3 equal sections in the
direction of the style desired and hold the
sections in place with clips.
Step 2: start at the nape of the neck, lift a 0.5 to 1
cm thick section horizontally. Place the section of
hair between the ELIPSIS3000 plates as close as
possible to the roots without touching the scalp.
Step 3: close the plates horizontally and slide the
styler slowly from the roots to the tips.
The floating plates will hold the hair comfortably
and efficiently throughout the straightening.
Step 4: repeat step 3 as often as necessary while
gradually moving up from the nape of the neck
to the top of the head. Repeat on the sides and
finish with the front section while following the
direction of the desired hairstyle until hair is fully
straightened.
Step 5: finish by gently brushing with the
BaBylissPRO flat brush (BABNB1E or BABNB2E).
®
Mist with BaBylissPRO CURL
®
(MCSS4E) to perfect the style and make hair
sleek and silky.
Elegant wave
On clean, tangle-free and dry hair:
Step 1: mist hair with with a little BaBylissPRO
CURL Defining Spray (MCDS8E).
Step 2: divide hair into 3 equal sections in the
direction of the style desired and hold the
sections in place using clips.
Step 3: starting at the nape of the neck, hold a
0.5cm to 1cm wide section up vertically. Place
the section of hair between the ELIPSIS3000
plates and rotate the styler a half-turn. Guiding
the section with your free hand, slide the styler
along the section to the tips. You can alternate a
row to the right with a row to the left and so on to
create classic waves.
Step 4: repeat step 3 as often as necessary while
gradually moving to the top of the head. Repeat
the operation on the sides and finish with the
front section in the direction of the desired style
until you have a full head of wavy hair.
Step 5: mist hair lightly with BaBylissPRO
Shine Spray Hair Spray (MCHS10-55E), brush gently using
a BaBylissPRO
emphasise the shape and the elegant waves.
CURL
®
boar hair brush (BABBB1E) to
®
14
Voluptuous curl
On clean, tangle-free and dry hair:
Step 1: mist hair with a little BaBylissPRO
®
Defining Spray (MCDS8E).
Step 2: divide hair into 3 equal sections in the
direction of the style desired and hold the
sections in place using clips.
Step 3: starting at the nape of the neck, hold a
0.5cm to 1cm wide section up vertically. Place the
section of hair between the ELIPSIS3000 plates
and rotate the styler one full turn. Guiding the
section with your free hand (once you've made
a full turn, the section of hair should be facing
you again), slide the styler along the section to
the tip.
Step 4: repeat step 3 as often as necessary while
gradually moving up to the top of the head.
Repeat the operation on the sides and finish with
the front section in the direction of the desired
hairstyle until the hair is completely curled.
Step 5: mist hair lightly with BaBylissPRO
Hair Spray (MCHS10-55E), complete the style by
running your fingers or a wide-toothed comb
through your curls, from the tips to the top to
create volume or from the roots to the tips to fluff
the hair and create voluptuous curls.
CURL
®
CURL
®