Engine Management; M-Tronic; Winter Operation - Stihl FS 460 C-M K Notice D'emploi

English

Engine Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
22
All manuals and user guides at all-guides.com

M-Tronic

General Information
The M-Tronic controls fuel feed and
ignition timing electronically in all
operating conditions.
M-Tronic guarantees simple and fast
starts. The engine is started in the
Start } position irrespective of climatic
conditions or engine temperature. After
starting, the Start } position can be
maintained until the engine runs
smoothly.
M-Tronic ensures optimum engine
power at all times, very good
acceleration and automatic adjustment
to suit changing conditions.
For this reason there is no need to
change the carburetor setting – the
carburetor has no adjusting screws.
If the usual good running behavior and
engine power are not reached after an
extreme change in operating conditions,
contact your servicing dealer for
assistance.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.

Winter Operation

At temperatures below +10 °C
Pre-heating carburetor
Moving a shutter causes heated air to be
drawn in from around the cylinder and
mixed with cold air in order to prevent
carburetor icing.
2
1
An arrow on the shroud (1) shows the
position of the shutter (2) for summer or
winter operation. Key to symbols:
Symbol "Sun" = summer operation
–
Symbol "Snowflake" = winter
–
operation
FS 460 C-M K