Adjusting The Throttle Cable - Stihl FS 460 C-M K Notice D'emploi

English
Move the handlebar to the required
N
position.
Closing the wing screw
Turn the wing screw clockwise as
N
far as stop.
Fold the grip of the wing screw down
N
so that it is flush.
12
All manuals and user guides at all-guides.com
Swiveling the handlebar
Transport position
2
7
Loosen the wing screw (7) and
N
unscrew it until the handlebar (2)
can be turned clockwise.
Turn the handlebar 90° and then
N
swing the handles down.
Tighten down the wing screw (7)
N
firmly.
Working position
Reverse the sequence described
N
above to swing the handles up and
turn the handlebar
counterclockwise.

Adjusting the Throttle Cable

Correct adjustment of the throttle cable
is a preconditon for correct operation of
the machine in all modes, from starting
to full throttle.
It may be necessary to readjust the
throttle cable after assembling the
machine or after a prolonged period of
operation.
The throttle cable can checked and
–
adjusted by the user: see
"Inspection and Maintenance by
User".
The throttle cable can be checked
–
and adjusted by your dealer. Have
the machine repaired by your
servicing dealer. STIHL
recommends a STIHL servicing
dealer.
FS 460 C-M K