How To Use The Remote Control - Num'axes CANICOM 300 Guide D'utilisation

CODING PROCEDURE FOR THE 1ST USE
1. Activate the remote control: press for 1 second the On/Off red button (
remote control.
2. Activate the receiver collar: approach the area where the On/Off switch magnet is located in the
remote control until coming in contact on red indicator located on the receiver collar, hold for 1
second.
3. Move the remote control away from the receiver collar.
4. Press the button
with your remote control.
RE-CODING PROCEDURE (for all codings other than the 1st)
1. Activate the remote control: press for 1 second the On/Off red button (
remote control.
2. Receiver collar in position « deactivate » (indicator off): approach the area where the On/Off switch
magnet is located in the remote control until coming in contact on red indicator located on the receiver
collar, hold for 6 seconds. The indicator lights in fixed green, then flashes in red.
3. Move the remote control away from the receiver collar.
4. Press the button
with your remote control.
 Reprogram a receiver collar
Receiver can be re-coded indefinitely, either with the same remote control, or with a new CANICOM
remote control.
Ref. § Re-coding procedure.

How to use the remote control


The CANICOM 300 remote control is designed to operate with 1 receiver collar.
button: beeper

If you press the « Beeper » button
this function: the beeper will continue to sound for as long as the button is pressed.
A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on the
collar goes from flashing green to permanent green for as long as the button is pressed.
It's up to you to use the beeper depending on the way you want to train your dog. With the beeper button
you can:
- send a sound to your dog when it is disobedient,
- draw its attention,...
It's very important to always use the beeper button in the same way in order not to disturb your dog.
of the remote control. A beep sound is emitted, the collar is then synchronized
of the remote control. A beep sound is emitted, the collar is then synchronized
the receiver collar will emit sound signals. There is no time limit for
Gb - 24
( (
) located on the side of the
( (
) located on the side of the