Maintenance; Troubleshooting - Num'axes CANICOM 300 Guide D'utilisation

Maintenance

Maintenance


- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and
- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and
neutral detergent.
neutral detergent.
- In order to maintain water tightness, we recommend the replacement of the seal located in the
- In order to maintain water tightness, we recommend the replacement of the seal located in the
receiver collar every year.
receiver collar every year.

Troubleshooting

Troubleshooting


Should your CANICOM 500 stop working or develop a fault, first read this user's guide over, then check
Should your CANICOM 300 stop working or develop a fault, first read this user's guide over, then check
the batteries (see § Checking/replacing battery of remote control and § Checking replacing battery
the batteries (see § Checking/replacing battery of remote control and § Checking/replacing battery
of receiver collar) and replace them if necessary and retry. Also check that you are using the product
of receiver collar) and replace them if necessary and retry. Also check that you are using the product
correctly.
correctly.
If you encounter any problem, re-code the receiver collar with the remote control (ref. re-coding
If you encounter any problem, re-code the receiver collar with the remote control (ref. re-coding
procedure).
procedure).
Re-initialise the system by removing the battery from its housing, then with a metallic tool (e.g.
Re-initialise the system by removing the battery from its housing, then with a metallic tool (e.g.
screwdriver, scissors) touch each of the 2 battery contacts for 2 seconds approximately (ref. Diagram 7).
screwdriver, scissors) touch each of the 2 battery contacts for 2 seconds approximately (ref. Diagram 7).
Insert the battery again: One beep is emitted, indicating the battery is in correct position.
Insert the battery again: One beep is emitted, indicating the battery is in correct position.
Restart your CANICOM using the remote control.
Restart your CANICOM using the remote control.
If the problem persists, contact your distributor.
If the problem persists, contact your distributor.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For all repairs, please supply the following:
For all repairs, please supply the following:
- the complete product
- the complete product
- the proof of purchase (invoice or sales receipt)
- the proof of purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs
incurred.
incurred.
Gb - 30
Gb - 30