To Change The Sweatband; Sr 580 Helmet; Replacement Of Gasket; Parts List - Sundstrom H06-0321 Mode D'emploi

6.8 To change the sweatband

SR 520 and SR 530 Hoods
The sweatband is secured to the forehead strap by double
sided adhesive tape. Proceed as follows:
• Pick away one end of the sweatband so that it is removed
together with the tape.
• Pull the sweatband off.
• Remove the protective paper and fit the new sweatband.

SR 580 Helmet

The sweatband is attached to the forehead strap by a Velcro
tape. Do the following:
• Unhook the face seal from the head harness. Fig. 21.
• Remove the sweatband.
• Fit the Velcro tape with the rough side towards the forehead
strap and the groove facing upwards.
• Attach the face seal hooks in the head harness. Fig. 21.

6.9 Replacement of gasket

The gasket is located inside the helmet. Fig. 2a.
Proceed as follows:
• Unscrew the hose from the helmet.
• Remove the gasket from the flange and fit the new gasket.

7. Parts list

Use only parts or accessories as described in these User
Instructions or on the NIOSH approval label for the SR 500
Powered Air-Purifying Respirator. Do not attempt to repair or
modify any component of the system except as described in
the User Instructions.
Part
O-ring for breathing hose
Set of valves for SR 520/SR 530
Sweatband for SR 520/SR 530
Peel off set SR 522 for SR 520/SR 530
Cleaning tissues SR 5226, box of 50
Helmet, incl. air duct for SR 580
Upper frame set for SR 580
Lower frame set for SR 580
Head harness for SR 580
Face seal SR 580
Leaf spring for SR 580
Set of valves for SR 580
Visor, PC for SR 580
Sweatband for SR 580
Breathing hose for SR 580
Gasket for SR 580
Peel of set SR 582 for SR 580
Neck comfort band for SR 580
Welding protection for SR 580
Face seal SR 584
Heat protection for helmet SR 580
Heat protection light for SR 580
Heat protection heavy for SR 580

8. Approvals

NIOSH 42CFR84 Approval
The SR 500 in combination with hood SR 520, SR 530 or
helmet SR 580 is NIOSH approved as a loose fitting respirator
with an Assigned Protection Factor (APF) of 1000. See NIOSH
Approval Label for approved component configurations,
cautions and limitation statements.
8

9. Warranty and Contact Information

IMPORTANT NOTICE
WARRANTY: In the event any Sundstrom product is found to
be defective in material, workmanship, or not in conformation
with any express warranty for a specific purpose, Sundstrom's
only obligation and your exclusive remedy shall be, at Sund-
strom's option, to repair, replace or refund the purchase price
of such parts or products upon timely notification thereof and
substantiation that the product has been stored, maintained
and used in accordance with Sundstrom's written instructions.
EXCLUSIONS TO WARRANTY: THIS WARRANTY IS EXCLU-
SIVE AND IS IN LIEU OF ANY
IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR OTHER WARRANTY
OF QUALITY, EXCEPT OF TITLE AND AGAINST PATENT
INFRINGEMENT.
LIMITATION OF LIABILITY: Except as provided above, Sund-
strom shall not be liable or responsible for any loss or damage,
whether direct, indirect, incidental, special or consequential,
arising out of sale, use or misuse of Sundstrom products, or
the user's inability to use such products. THE REMEDIES SET
FORTH HEREIN ARE EXCLUSIVE.
Contact Information
NORTH AMERICA
143 Maple St. Warwick, RI 02888
Office 1-401-434-7300
Fax 1-401-434-8300
Toll free 1- 877- SUNDSTROM
Ordering No.
Web Site: www.srsafety.com
R06-0202
R06-0201
R06-0203 Technical Support & Customer Service
T06-0201 E-mail: support@srsafety.com
H09-0401
R06-0801 Order Department
R06-0802 E-mail: order@srsafety.se
R06-0803
R06-0804
R06-0805
R06-0806
R06-0807
R06-0808
R06-0809
R06-0810
R01-1205
T06-0801
T06-0803
T06-8011
T06-8012
R06-0813
R06-0814
R06-0815