Ugolini Delice 5L Carnet D'instructions page 37

display, to show the set temperature and two keys
w h o s e f u n c t i o n s
Key A : to decrease the desired temperature
one degree by one; by keeping it
pressed for more than two seconds it
is possible to quickly decrease the
temperature.
Key B : to increase the desired temperature
one degree by one; by keeping it
pressed for more than two seconds it
is possible to quickly increase the
temperature.
On the display, the symbols °C or °F indicates the
current temperature unit and the symbol
dicates the turning on of the heating element.
When the dispenser is turned on, both the mixing
and the heating are turned on and on the display
the set temperature is shown. The set temperatu-
re value blinks until when the product has rea-
ched the desired temperature.
When the dispenser is turned OFF all the current
settings are saved into memory to be effective at
the following power on.
AUTOMATING COOKING CYCLE
By pressing together key A and B the dispenser
performs an Automatic Cooking Cycle. This me-
ans that the product is heated up to 95 °C and
maintained at this temperature for 15 minutes.
After the expiration of the Automatic Cooking
Cycle the product is maintained at the desired
temperature set before the cycle.
The temperature and the length of the Automatic
Cooking Cycle are factory preset. To reset them
turn the dispenser off and then turn it on keeping
key A pressed. On the display the Cooking Tem-
perature is shown and it is possible to decease or
increase it using keys A or B and to confirm it
pressing both keys together. Then the length of
the Cooking Cycle is shown and it is possible to
decease or increase it using keys A or B and to
confirm it pressing both keys together.
a r e t h e f o l l o w i n g :
in-
VERSION ELECTRONIQUE
(OPTION)
L'interrupteur C de l'appareil a les fonctions les
suivantes:
Position 0 : l'appareil est éteint.
Position I : mélangeur et chauffage sont en
fonction
L'appareil a un système électronique qui permet
de régler la température de la boisson dans la
cuve.
Le système a deux boutons dont les fonctions
sont les suivantes :
Bouton A : chaque poussée permet de
b a i s s e r l a t e m p é r a t ur e d' 1
degré. En restant appuyé plus
de 2 secondes, le degré de
température pourra être baissé
plus rapidement.
Bouton B : chaque poussée permet d'aug-
menter la température d'1 degré.
En restant appuyé plus de 2 se-
condes, le degré de température
pourra être augmenté plus rapi-
dement.
Le système est doté d'un écran montrant la
température désirée pour le produit, l'indication
de l'échelle utilisée pour la visualisation de la
t e m p é r a t u r e , g r a d u é e e n ° C o u ° F e t l e
symbole qui indique l'allumage de l'élément
réchauffant.
A la mise en marche de l'appareil, le mélangeur
et le chauffage sont mis en route et l'écran montre
37