Displaying Tv Information; Mute Function; Picture Mode Selection; Freezing Picture - Salora LCD2631DVX Mode D'emploi

Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
Select Autoposition item by using " " or " " buttons.
Press OK or " ", " " button.
Warning : Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using " " or " " button.
Use " " or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top
or bottom of the screen.
Select V Position item by using " " or " " button.
Use " " or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use
" " or " " button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Select Dot Clock item by using " " or " " buttons.
Use " " or " " button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press " " or " " button to select the second icon. PC
Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical to
settings defi ned in TV picture menu under "Analogue
TV Menu System".
Note : If you set Colour Temp as User, you can defi ne
R, G, B settings manually.
Sound, Feature and Source settings are identical to
the settings explained in Analog TV menu system.
03_MB25_[GB]_(01-TV)_COST_1900UK_IDTV_BRONZE9_26883W_10064216.indd 92 03_MB25_[GB]_(01-TV)_COST_1900UK_IDTV_BRONZE9_26883W_10064216.indd 92

Displaying TV Information

Programme Number , Programme Name , Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
"INFO" button is pressed.

Mute Function

Press " " button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the fi rst
one is pressing the "
is increasing the volume level.

Picture Mode Selection

By pressing PRESETS button, you can change
Picture Mode settings in accordance with your
viewing requirements. Available options are Dynamic,
Natural and Cinema.
Note: This feature cannot be set while in PC mode.

Freezing Picture

You can freeze the picture on the screen by pressing
the " OK " button on the remote control. Press the
" OK " button to freeze picture. Press again to quit
freeze mode.

Zoom Modes

You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
Press SCREEN button to directly change the zoom
mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
Zoom mode cannot be changed while in PC mode.
Auto
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fi ll the wide TV
screen.
English - 92 -
" button and the second one
31.08.2009 13:16:47 31.08.2009 13:16:47