Sound Menu - Salora LCD2631DVX Mode D'emploi

Sound Menu

(optional)
Volume
Press " " or " " button to select Volume . Press " "
or " " button to change the level of the Volume.
Equalizer
Press " " or " " button to select Equalizer . Press "
" button to view equalizer menu.
Press " " or " " button to change the preset. In
equalizer menu, the preset can be changed to Music ,
Movie , Speech , Flat , Classic and User .
Select the desired frequency by pressing " " or " "
button and increase or decrease the frequency gain
by pressing " " or " " button.
Press the " M " button to return to the previous menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .
Balance
This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance. Press "
" or " " button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
03_MB25_[GB]_(01-TV)_COST_1900UK_IDTV_BRONZE9_26883W_10064216.indd 88 03_MB25_[GB]_(01-TV)_COST_1900UK_IDTV_BRONZE9_26883W_10064216.indd 88
Headphone
Press " " or " " button to select Headphone . Press
" " button to view the headphone menu.
Note: Headphone will be disabled when SPDIF option
is set to on.
Headphone sub-menu options are described below:
Volume
Press " " or " " button to select Volume . Press "
" button to increase headphone volume level. Press
" " button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63 .
Sound Mode (optional)
Press " " or " " button to select Sound Mode . Using
" " or " " button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press " " or " " button to select AVL . Press " " or
" " button to set the AVL as On or Off .
Spdif Out
Press " " or " " button to select Spdif Out . Press " "
or " " button to set the Spdif Out . as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.
Effect (optional)
If you are watching a mono broadcast, set Effect on to
obtain a better sound effect which will be more stereo-
like. If the current sound system is stereo, switching
this effect on will give a more spatial effect.
Press " " or " " button to select Effect. Press " "
or " " button to set as On or Off .
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored... " will be
displayed on the screen.
English - 88 -
31.08.2009 13:16:45 31.08.2009 13:16:45