5
RJ-45
6
Tact Switch
7
2-pin terminal block
Micro-SD Card Insertion
User can install and change Micro-SD card as shown in the following picture.
Connections
Connecting the Network
Connect a standard RJ-45 cable to the network port of the camera. Generally a crossover
cable is used for directly connection to PC, while a direct cable is used for connection to
a hub.
Connecting Audio
Connect speaker to audio output line and external mic to audio input line.
Connecting Alarms
A1(Alarm Input 1)
You can use external devices to signal the dome camera to react on events. Mechanical or
electrical switches can be wired to the A1 (Alarm Input 1) and G (Ground) connectors.
6
Ethernet, RJ-45 port compatible with 10/100Mbps having PoE
functionality
TELE/FAR/WIDE/NEAR
24VAC or 12VDC+
24VAC or 12VDC-
Micro SD Card Slot