Berbel Skyline Edge Sound Mode D'emploi page 46

The sound system
responds slowly, or
not at all, to the App's
commands
The sound image is
dull, diffuse, thin or
otherwise
unsatisfactory
Playback using the
Bluetooth connection
does not work
It is not possible to
establish a Bluetooth
connection, although
the connection has
already been
established.
The firmware update
process was not
successful
46
Cause :
The quality of the WLAN connection is poor, since the field
strength of the WLAN signal is low.
Remedy:
You may need to install a WLAN repeater, and connect the App
and the sound system to the repeater's WLAN.
Cause :
The equalisation setting is not correct.
Remedy:
Alter the setting to suit the characteristics of your listening room.
See the chapter entitled "System settings".
Cause 1:
The sound system and the device you wish to use for playback
are not connected to each other. The Status indicator on the
extractor hood flashes blue.
Remedy:
Create the Bluetooth connection using the device you wish to
use for playback. As soon as the sound system is connected, the
Status indicator will light up solid blue.
Cause 2:
Another device is already connected to the sound system. The
Status indicator on the extractor hood lights up solid blue.
Remedy:
Disconnect the device already connected. The new device can
be connected as soon as the Status indicator flashes blue.
Cause 3:
The distance between the Skyline Edge Sound and the Bluetooth
device is too great.
Remedy:
Reduce the distance until the sound system is detected.
Cause:
The playback device has been connected before, but the saved
connection is no longer working.
Remedy:
Delete the sound system from the list of known devices (Apple:
"Ignore this device"). Then look for the sound system again and
connect again.
Remedy:
Restart the update process manually, using the buttons on the
extractor hood.
For details see the chapter entitled "Software updates".