Bluetooth Playback - Berbel Skyline Edge Sound Mode D'emploi



Selecting the
Bluetooth
source

Setting up an
audio transfer


36

Bluetooth playback

The sound system's integral Bluetooth interface makes it possible to
transfer music by wireless means from devices such as smartphones,
table PCs, iPods etc.
The mobile device must support the A2DP Bluetooth audio transfer
protocol if you wish to transfer Bluetooth audio from a mobile device to
the sound system.
First press the
source; alternatively you can use the App. The source is selected when
the Status indicator flashes blue or lights up solid blue.
If you wish to play music from a Bluetooth-enabled device through the
sound system, the external device must first be bound (pairing process).
This is the procedure for making a connection:

The sound system is ready to connect when the Status indicator
flashes blue.

If the Status indicator lights up solid blue instead of flashing blue,
then the device is already connected. If you wish to make a new
connection with another device, the first step must always be to
disconnect the existing one.

When the Status indicator flashes blue, you can start the search for
Bluetooth devices on your mobile device.

Once the sound system is found, connect it to your mobile device.
The Status indicator switches from flashing blue to solid blue when the
connection is successful.
If your device requests a PIN code, this should always be '0000'.
Due to the large number of different devices available it is only possible
here to provide a general description for setting up the radio link. For
detailed information on this aspect please refer to the operating
instructions supplied with your device.
button the extractor hood to select the Bluetooth