Status Indicator - Berbel Skyline Edge Sound Mode D'emploi






 

Status indicator

By default the Status indicator shows the currently selected source.
Different colours are assigned to the individual sources.
The indicator also alerts you to possible problems, as well as indicating
the machine's readiness for WLAN pairing and Bluetooth pairing.
The following Status displays are possible:
Colour
red
red-white
flashing
flashing red
(twice per second)
blue
flashing blue-
white
flashing blue
green
flashing green-
white
yellow
flashing yellow-
white
flashing white
flashing red
(five times per second)
If the Status LED alternates white with the source colour, then no WLAN
connection is present. In this state playback via one of these sources,
and App control, is not possible. If this should occur, you need to
complete the WLAN connection to the network.
For more information on this please refer to the chapter entitled "WLAN -
configuring the WLAN connection".
Status
The sound system is switched off (stand-by)
and connected to a WLAN
The sound system is switched off (stand-by)
and is not connected to a WLAN
The sound system is starting, and will soon be
ready for use
The Bluetooth source is selected, and a device
is connected
Bluetooth source: a device is connected via
Bluetooth. The sound system is not connected
to a WLAN
Bluetooth source: no device connected. The
sound system can be connected
The SCL (Streaming Client) source is selected
The SCL (Streaming Client) source is selected,
but there is no connection to the WLAN
The Internet source is selected
The Internet source is selected, but there is no
connection to the WLAN
The device is in WLAN pairing mode
(WPS function)
The machine's protective circuit has been
triggered.
(excess temperature or short-circuit detected)
31