Shooting Photos; Mode Button - Sony HDR-CX360 Mode D'emploi

Tips

See page 63 on the recordable time of movies.

You can record photos during movie recording by pressing PHOTO fully (Dual Rec).

[ SteadyShot] is set to [Active] in the default setting.

You can specify the priority face by touching it.

You can capture photos from recorded movies.

You can check the recordable time, estimated remaining capacity, etc., by touching

[Setup]  [ (Media Settings)]  [Media Info].
The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [Guide Frame] to
[On], and record images using the outer frame displayed on the screen as a guide.
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and

then adjust the angle ().
 90 degrees (max.)
 180 degrees (max.)
Data code during recording
The recording date, time and condition , and coordinates (HDR-CX360V/PJ30V) are
recorded automatically on the recording media. They are not displayed during recording.
However, you can check them as [Data Code] during playback. To display them, touch
(MENU)  [Setup]  [
.

Shooting photos

MODE button

(Movie): When recording a movie
(Photo): When recording a photo
US

(Playback Settings)]  [Data Code]  a desired setting 
PHOTO button
 90 degrees to the
camcorder
Flashes  Lights up
When disappears, the photo is recorded.
(MENU) 