Connecting The Water And Electricity Supplies - Saba LVIF1020DD1542G Mode D'emploi

Connecting the water and electricity supplies

A Connection to the water and electricity supplies should
only be performed by a qualified technician.
The dishwasher should not stand on top of the water hoses
or the electricity supply cable A
The appliance must be connected to the water supply
network using new piping. Do not use old piping.
 Connecting the water inlet hose
GB
Connect the cold water supply hose to a threaded 3/4(inch)
connector and make sure that it is fastened tightly in place. If
the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is
clear and free of impurities. If this precaution is not taken, there
is a risk that the water inlet can get blocked and the appliance
could be damaged.
104