Positioning The Appliance; Leveling The Appliance; Water Outlet - Saba LVIF1020DD1542G Mode D'emploi

• Positioning the Appliance

Position the appliance in the desired location. The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or wall. The dishwasher is equipped with water supply
and drain hoses that can be positioned to the right or the left to
facilitate proper installation.

• Leveling the Appliance

Once the appliance is positioned, adjust the feet (screwing them
in or out) to adjust the height of the dishwasher, making it level.
In any case, the appliance should not be inclined more than 2° .
GB
NOTE: The maximum adjustment height of the feet is 20 mm.
• How to Drain Excess Water From Hoses
If the sink is 1000mm higher from the floor, the excess water in
hoses cannot be drained directly into the sink. It will be necessary
to drain excess water from hoses into a bowl or a suitable
container that is held outside and lower than the sink.

• Water Outlet

Connect the water drain hose. The drain hose must be correctly
fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
107