Saba LVIF1020DD1542G Mode D'emploi page 76

C. Place the end of the funnel (supplied) into the hole and
introduce about 2kg of salt. It is normal for a small amount of
water to come out of the salt container.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the
salt container is filled with salt.
NOTE:
1. The salt container must be refilled when the salt warning light
in the control panel comes on. Though the salt container is filled
enough, the indicator light may not black out before the salt
fully dissolve. If there is no salt warning light in the control panel
(for some models), you can judge when to load the salt into
the softener by the cycles that the dishwasher had run (see the
following schema).
2. If there are spills of the salt, a soak program could be run to wipe
them out.
C. Fill the Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, spot and streak free drying.
GB
75