Saba LVIF1020DD1542G Mode D'emploi page 78

RINSE AID DISPENSER
1
1. To open the dispenser, turn the cap to the «open» (left) arrow
and lift it out.
2. Pour the rinse aid into the dispenser, be careful not to overfill.
3. Replace the cap by inserting it aligned with «open» arrow and
turning it to the «closed» (right) arrow.
The rinse aid is released during the final rinse to prevent water
from forming droplets on your dishes that can leave spots and
streaks. It also improves drying by allowing water to sheet off
the dishes. Your dishwashers are designed to use liquid rinse
aids. The rinse aid dispenser is located inside the door next to the
detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the
dispenser until the level indicator turns completely black. The
volume of the rinse aid container is about 140ml.
Be careful not to overfill the dispenser, because this could cause
over sudsing. Wipe away any spills with a damp cloth. Don't
forget to replace the cap before you close dishwasher door.
2 3
GB
77