Filter Assembly - Saba LVIF1020DD1542G Mode D'emploi

1
NOTE: If operate from step 1 to step 2, the filter system will be
removed; while operate from step 2 to step 1, the filter system
will be installed.

Filter assembly

GB
For best performance and results, the filter assembly must be
cleaned. The filter efficiently removes food particles from the
wash water, allowing it to be recirculated during the cycle. For
this reason, it is a good idea to remove the larger food particles
trapped in the filter after each wash cycle by rinsing the
semicircular filter and cup under running water. To remove the
filter assembly, pull on the cup handle in the upward direction.
The entire filter assembly should be cleaned once a week.
To clean the coarse filter and the micro filter, use a cleaning
brush. Then, reassemble the filter parts as shown in the figures
above and reinsert the entire assembly in the dishwasher,
positioning in its seat and pressing downward. The dishwasher
must never be used without the filters. Improper replacement of
the filter may reduce the performance level of the appliance and
damage dishes and utensils.
98
Step 1: contrarotate the
Coarse filter ,and then lift
it up;
Step 2: lift the Flat filter up
2