Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Converting the welding torch connection
General remarks
The conversion of a welding torch connection is demonstrated using the FSC connection
type.
The installation of a welding torch connection is demonstrated using the Euro connection
type.
The conversion and installation process is identical for all connection types.
Safety
Incorrect operation or shoddy workmanship can cause serious injury or damage.
All functions described in this document may only be carried out by trained and qualified
personnel after they have fully read and understood the following documents:
▶
▶
An electric shock can be fatal.
Before starting work:
▶
▶
▶
After opening the device, use a suitable measuring instrument to check that electrically
charged components (e.g. capacitors) have been discharged.
Preparatory work
1
2
3
4
WARNING!
this document
all documents relating to the system components, especially the safety rules
WARNING!
turn the power source mains switch to the "O" position
disconnect the power source from the mains
put up an easy-to-understand warning sign to stop anybody inadvertently switching it
back on again
Disconnect all connections on the device from all other system components
Take the wirespool or basket-type spool off the device
Place the device on a suitable base
Open the left side panel
11
Publicité
Table des Matières
