Publicité
Les langues disponibles
Les langues disponibles
Finally...
1
2
3
4
14
Close left side panel
Return device to its original position
Insert wirespool or basket-type spool
Restore connections to other system components
Push the welding torch connection into
9
the device as far as it will go
Close the clamping lever (10)
10
Only when fitting FSC:
11
Connect the welding torch to the
device (this step is not necessary for
all other connection types)
Refit and tighten the two TX25 screws
12
to the welding torch connection on the
front of the device
-
Tightening torque = 3 Nm
(10)
Publicité
