Controlling Both Units As A Complete System - Bose Acoustic Wave Notice D'utilisation

Using Your Acoustic Wave

Controlling both units as a complete system

Function
To turn on the Acoustic Wave
system to its last source played................
(NOT the CD changer)
To turn on and select the CD changer......
To change mode of single CD play.........
To set radio presets....................................
(with the radio station selected)
Press and hold down the button that you
want to assign to the selected station.
Results: A brief beep registers your setting.
To tune to a preset radio station...............
(with the radio on)
To play an auxiliary component.................
• First, turn on the power for that compo-
nent by pressing the Power button on its
remote or console.
• Take note of whether the component is
connected to the AUX1 or AUX2 jacks on
the back of the changer.
• Then, press the appropriate button.
12
® Multi-Disc Changer
The Acoustic Wave ® multi-disc remote control can change some of the Acoustic Wave
system settings and select and play its sources, as well as operating the changer functions.
Note: For details on how the Acoustic Wave
able for controlling it, refer to the owner's guide that came in the carton with the system.
Remote control
®
music
On
Off
Changer
Not available
or
AUX1
® music system functions and the options avail-
AUX 1 AUX 2
Play/Pause Stop Next Disc
Changer console
Not available
Play/Pause
Not available
Not available
Play/Pause
Not available
Or
AUX2
AUX 2
Acoustic Wave Music System
CD Play/Pause Stop Skip/Scan CD Mode
ON/OFF
CD Mode
System control panel
On/Off
Not available
CD Mode
Presets
1 2 3
Presets
1 2 3
Not available
AUX 1
® music
AUX VOLUME
Presets
1 2 3 4 5
FM AM
Volume Seek/Tune
AUX On/Off
4 5
4 5