Operation - Maytag SkyBox Rookie Fridge MBR1980A Mode D'emploi

Operation

Starting Your Refrigerator
1. Follow steps for attaching wheels (see page 3) and
lock refrigerator wheels into place in the appropriate
location.
2. Clean the refrigerator by wiping the exterior with a
soft, dry cloth and the interior with a clean, moist
cloth.
3. Insert power cord into properly grounded receptacle
(see page 1).
4. Turn the thermostat dial inside the refrigerator to "7".
Close the door and allow the refrigerator to cool for
15-20 minutes before loading.
5. Adjust thermostat dial to desired position.
6. Locate the switch on the back of the unit and press
it up to illuminate the display panel on the front of
the refrigerator.
Thermostat Dial
TEMP REG
To control the refrigerator temperature, turn the dial
from 1–7. As the setting numbers increase, the
refrigerator becomes cooler, so number 7 is the coldest
setting.
NOTE: If you unplug the refrigerator, wait 3-5 minutes
before restarting. The refrigerator may fail to operate
properly if restarted too quickly.
Light Switch
The light switch controls the back light for the front
panel. Switched to the On position, the front panel will
be backlit. When the switch is in the Off position, the
front panel will not be backlit. The On/Off switch does
not affect the refrigerators cooling function.
4