Parkside PAFS 550 A1 Traduction Des Instructions D'origine page 8

Package contents
1 airless paint sprayer
1 paint spray gun
1 intake hose, 1 m, (pre-fitted) including return
hose
1 high-pressure hose, 9 m
1 white HEA filter (pre-fitted)
1 yellow HEA filter
2 nozzles 311 and 517* (*pre-fitted)
1 viscosity cup
1 set of operating instructions
Technical specifications
Motor unit
Rated voltage
Rated power
consumption
Max. paint flow rate
Max. working pressure
Max. temperature
of coating material
Ambient temperature,
appliance
Protection class
Protection type
Paint spray gun
Max. surface temperature 43°C
Max. temperature of
coating material
PAFS 550 A1
230 V ∼, 50 Hz (AC)
550 W
1.25 L/min
110 bar
40°C
20°C up to max. 40°C
I
IPX3 Protection against
water spray, at any angle
up to 60° to normal
operating position
40°C
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 14462. The rated noise level of the
paint spray gun is typically:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
on the handle
Uncertainty
Symbols on the appliance
Always wear safety goggles.
Always wear a mask.
Always wear ear muffs.
Always wear conductive protective gloves.
Wear non-slip, conductive safety shoes.
Wear protective clothing.
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with another
tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
L = 78.4 dB
pA
K = 2.5 dB (A)
L = 91.2 dB
WA
K= 2.5 dB (A)
a < 2.5 m/s 2
h
K = 1.5 m/s 2
GB │ IE │ 3 ■