Service And Testing; Transport And Storage - INTERSPIRO 95283E91 Manuel Utilisateur

4 SERVICE AND TESTING

Service and testing must as a minimum be carried out according to Interspiro's
Service and Testing Schedule with document number 30500, or according to local
requirements.
The latest versions is found under Downloads at interspiro.com.

5 TRANSPORT AND STORAGE

All rubber parts should be stored in dry conditions, well protected from direct sunlight
and extreme temperatures. The full face mask is preferably stored in the supplied
storage bag.
During transport, the equipment must be stored so that the equipment cannot be
damaged and people cannot be injured.
The equipment must not be stored where the temperature may be expected to go
above 70 ºC (158 °F). The equipment must be completely dry before being put into
storage.
16