Chapter 4. Safety Standards; Description Of Safety Stickers; Warnings - PolyScience MV35 XP Instructions Pour L'installation, L'emploi Et L'entretien

Chapter 4. Safety standards

4.1. Description of safety stickers

The following safety stickers feature on the machine:
 On the power input.
ATTENTION! Periodically check the correct insulation of the power cable and the integrity of the
socket. During machine operation, the inspection panels to the electric system must be correctly
fitted.
 On the sealing bars positioned inside the tank
On the vacuum pump positioned inside the machine.

ATTENTION! Hot members. It shows the danger of burning, thus involving the risk of a serious
accident for the exposed person.

4.2. Warnings

THE MACHINE CAN NOT BE USED BY UNTRAINED PERSONNEL!
During work pay attention to all hot parts of the machine. The temperature they can reach is so high
that it can cause burns.
Smoking is forbidden while the machine is operating!
Never use gaseous mixtures in presence of oxygen in a percentage higher than the atmospheric one
(~ 19%).
Do not touch the sealing blade (16) immediately after sealing.
Danger of burns due to hot blade.
Do not seal if the sealing wire is broken.
Replace it immediately.
Do not touch the vacuum pump (23) just after a working cycle.
Possibility of burning due to the high temperature the pump
may reach.
 On the sealing bars positioned inside the tank
ATTENTION! Indicates the danger of burns with risk of accident in case of
contact with the hot surface of the sealing bar.
 On the Plexiglas lid.
ATTENTION! Indicates how to clean the lid to prevent damaging it and reducing
its transparency or strength.
25
GB