MAINTENANCE
REPLACEMENT PARTS
Filter
RVFFK950
Brushroll
1152FK950
Side Brushes
RVSBK950
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
s h a r kc l e a n . c o m
Dust Bin
1157FK850C
Brushroll Access Door
1154FK950
Battery
RVBAT850
MAINTENANCE
TROUBLESHOOTING
If any error lights are illuminated or flashing on your Shark ION™ Robot, see the error code
chart below:
ERROR CODE
Power may be turned off or battery may need charging. Turn
ALL LED LIGHTS are off
power switch to On position. If no response, place robot on dock
to charge.
Suction motor failure. Remove blockages and clean filters.
CLEAN (RED) + ! flashing together
Remove dust bin and make sure nothing is blocking suction.
Robot may be stuck on an obstacle. Move robot to a new location
on a level surface.
CLEAN LIGHT flashing red
Front bumper may be jammed. Check bumper.
If light continues to flash, remove the front caster wheel and clean
the wheel housing.
Robot may be stuck on an obstacle. Move robot to a new location
on a level surface.
MAX LIGHT flashing
Front bumper may be jammed. Check bumper.
If light continues to flash, remove the front caster wheel and clean
the wheel housing.
Your robot's BotBoundary™ sensors are reporting an error.
DOCK LIGHT flashing
Please contact Customer Service at 1-800-798-7398.
Cliff sensors are reporting an error.
Wipe cliff sensors with a clean cloth.
CLEAN (RED) + DOCK
flashing together
Robot cannot start due to an error. Ensure your robot is on a
level surface with no obstructions.
CLEAN (RED) + MAX
The dust bin has been removed and needs to be reinserted.
flashing together
MAX AND ! LIGHTS
A side brush is stuck. Remove debris from side brushes.
flashing together
CLEAN (RED) + MAX + !
A wheel is stuck. Remove debris from wheel.
flashing together
DOCK, MAX, AND ! LIGHTS
Blockage in brushroll. Remove obstruction.
flashing together
For all other issues, please call Customer Service at 1-800-798-7398.
SOLUTION
s h a r kc l e a n . c o m