Replacement Parts; Error Code - shark IQROBOT RV1000 Série Guide D'utilisation

REPLACEMENT PARTS

Filter Robot Dust Bin
Brushroll Door Side Brushes
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
sharkc le a n.com
Brushroll Battery
Charging Dock
BotBoundary™
MAINTENANCE
CAUTION: Turn off power before performing any maintenance.
TROUBLESHOOTING
If any error lights are illuminated or flashing on your Shark IQ Robot™, see the error code
chart below:

ERROR CODE

CLEAN (RED) + ! (RED) flashing
CLEAN (RED) flashing
DOCK (RED) flashing
CLEAN (BLUE) + DOCK (RED) solid
CLEAN (RED) + DOCK (BLUE) flashing
CLEAN (RED) + DOCK (RED) flashing
DOCK (RED) + ! (RED) flashing
CLEAN (RED) + DOCK (RED) + ! (RED) flashing
CLEAN (RED) + DOCK (BLUE) alternating
CLEAN (BLUE) + DOCK (RED) + ! (RED) flashing
CLEAN (BLUE) + ! (RED) flashing
CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing
CLEAN (BLUE) + DOCK (RED) flashing
BATTERY ICON (RED) flashing
CLEAN (RED) + ! (RED) alternating
For all other issues, please call Customer Service at 1-888-228-5531.
ERROR
SOLUTION
NUMBER
Suction motor failure. Remove and empty the dust
3
bin, clean the filters, and remove blockages to
ensure nothing is reducing suction.
Robot may be stuck on an obstacle. Move robot to
10
a new location on a level surface.
Front bumper may be jammed. Clean the bumper
6
and make sure it moves in and out freely.
BotBoundary™ error. Move your robot to a flat
14
surface away from the magnetic boundary strip and
try cleaning again.
Cliff sensor error. Move your robot to a new location
7
and clean its cliff sensors.
Robot dustbin has been removed and needs to be
9
reinserted.
Side brush is stuck. Remove any debris from around
2
the side brushes.
A drive wheel is stuck. Clean the wheels and remove
2
any debris wrapped around the axles.
Robot is stuck. Move your robot to a new location
16
and make sure the front bumper moves in and out
freely.
Wheel motor encoder failure. Please contact Shark
2
Customer Care at 1-800-798-7398.
Blockage in brushroll. Remove any debris from
2
around the brushroll.
Robot has encountered an error while booting.
21
Please turn the power off and back on.
Robot cannot locate dock. Please pick up your robot
23
and place it on the dock.
Battery is critically low and needs recharging.
24
Power may be turned off or the battery may need
charging.
Blockage in brushroll. Remove any debris from
2
around the brushroll.
s ha rkc l ea n.co m