Charging The Shark Ion™ Robot; Charge Indicator Lights - shark ion RV850C Série Guide D'utilisation

CHARGING THE SHARK ION™ ROBOT
IMPORTANT: The Shark ION Robot has a pre-installed rechargeable battery. Battery must be fully charged
before using.
To charge, the Power button on the side of the robot
must be in the ON position.

CHARGE INDICATOR LIGHTS

Clean
Dock Max
The blue Charge Indicator Lights
show how much charge is remaining.
s h a r kc l e a n . c o m
Cycles While Charging
In Use
Full Charge Nearly Full Mid Charge Low Charge
While
Charging
Cycles While Charging
While the robot is charging, all three blue LED
lights will cycle. When charging is complete,
all three blue lights will illuminate steadily.
If all the indicator lights are off, then either the
power switch is turned OFF or there is no charge
remaining. Turn the power switch ON. If all
indicator lights remain off, then charge the
unit on the dock.
Full Charge Nearly Full Mid Charge Low Charge
3 ft.
5 ft.
Full Charge
Place the Charging Dock on a level surface with its back against a wall, in a space without obstructions, that
can easily be accessed by your robot. Remove any objects that are closer than 3 feet (1 meter) from either
side of the dock, or closer than 5 feet (1.52 meters) from the front of the dock. Plug the Charging Adapter
into a wall outlet. The dock must be plugged in continually for the robot to find it. The robot will beep when
it starts charging on the dock.
Full Charge
If the robot has no charge and cannot return to the
charging dock, place it on the dock manually.
CHARGING THE SHARK ION™ ROBOT
CHARGING DOCK
3 ft.
CHARGING
When the cleaning cycle is complete, or if the battery
is running low, the robot will begin to search for the
dock. If your robot doesn't return to the dock, its
charge may have run out.
s h a r kc l e a n . c o m