Publicité
ASSEMBLING AND INSTALLING THE RELEASABLE SHAFT ASSEMBLY - ASSEMBLAGGIO ED INSTALLAZIONE GRUPPO ALBERO
DISINNESTABILE - ABZIEHBARES WELLENAGGREGAT ZUSAMMENBAUEN UND INSTALLIEREN - ASEMBLAJE Y INSTALACION GRUPO EJE
25
GB
Apply Loctite 510 to the surface of the flange (21) and install the
complete coupling assembly (25). Lock coupling with screws (32)
coated with Loctite 510, and tighten using the alternate method to a
torque of 49±51 Nm.
2
3
GB
Install flange (3), O-ring (2), and apply Loctite 242 to the threaded
portion of pinion. Apply an appropriate counter wrench to the
flange and tighten nut to a torque of 260±280 Nm.
GB
DESCONECTABLE - ASSEMBLAGE ET INSTALLATION GROUPE ARBRE DEBRAYABLE
21
32
DNF01030
a
DNF00691
c
e
58
8
GB
Apply Loctite 510 to the surface for the piston assembly (8). Install
the piston assembly (8) by centring the reference pins and fasten
with screws (7); tighten screws to a torque of 25±26 Nm.
17
6
18
GB
Install coupling sensor (6) complete with O-ring (17) and retaining
ring (18).
Tighten to a torque of 54 Nm.
GB
7
5
DNF01040
b
DNF00760
d
f
Publicité
