Cleaning And Care; Descaling - Unold 18580 Notice D'utilisation

All manuals and user guides at all-guides.com
use - keePinG Water Warm
1. With the keep warm function it is
possible to keep water that has
already been heated at the selec-
ted temperature.
2. Prepare the appliance as descri-
bed above, however do not switch
it on yet via the "
3. Select the desired temperature to
which the water should be heated.
4. Now press the "
and keep it depressed for three
seconds. This button, the UNOLD
logo and the display of the selec-
ted temperature will flash three
times to indicate that the appli-
ance is in keep warm mode.
5. The keep warm mode will be
maintained for a maximum of
120 minutes, then the appliance
will switch off for safety reasons.

cleaninG anD care

Before cleaning, always turn off the
1.
appliance and unplug it from the
electrical outlet.
2. allow the appliance to cool before
cleaning it.
3. Do not immerse the base, power
cord or kettle in water or other
liquids or wash them in the dish-
washer.
4. Wipe off the base and the kettle
with a damp cloth and a little

DescalinG

1. To keep the appliance operating
efficiently and to prolong its ser-
vice life, it should be descaled
regularly, depending on the hard-
ness of your water.
2. Use off-the-shelf descaling pro-
ducts for electronic kettles and
comply with the manufacturer's
instructions. To descale, fill the
kettle half full, maximum, other-
wise the liquid can boil over and
can cause severe injuries.
16
6.
7.
" button.
8.
" button
5.
3.
4.
5.
During keep warm mode the dis-
play of the selected temperature
and the UNOLD logo are illumi-
nated.
If you want to end keep warm
mode, switch off the appliance
via the " " button.
Keep warm mode will end auto-
matically when you take the appli-
ance off of the base.
Boiling water can cause scal-
ding. therefore, please handle
the appliance with care when
it contains hot water.
dishwashing detergent. Do not
use sponges that can scratch,
abrasive scouring agents, steel
wool, metal objects, disinfectants
or hot cleaning agents, as they
can damage the appliance.
The appliance must be comple-
tely dry on the outside before you
use it again.
Heat the liquid to between 60 and
80°C (do not boil!) and allow it to
sit for some time in the electronic
kettle.
Pour the descaling solution out of
the kettle.
Then fill it with fresh water and
bring to a boil. Pour this water out
as well. Then rinse out the kettle
at least twice with clean water.