Before Using The Appliance The First Time - Unold 18580 Notice D'utilisation

water. The boil dry protection is
deactivated and the appliance is
ready for operation again.
30. To avoid damage, do not use the
appliance with accessories of
other manufacturers or brands.
31. Unplug the mains plug from the
electrical outlet after use and
before cleaning. Never leave the
appliance unattended when the
mains plug is plugged in.
the manufacturer will not be liable in the event of incorrect assembly, improper or
incorrect use or if repairs are carried out by unauthorized third parties.
BeFore usinG the aPPliance For the First time
1. Remove all packaging materials
and any transport safeguards.
Keep children away from the
packaging materials due to the
danger of suffocation.
2. Clean all parts with a damp cloth.
3. Connect the base to the power
supply (220–240 V~, 50/60 Hz)
via the power cord.
4. All indicator lights light up and
indicate that the appliance is
ready for operation.
5. Check to make sure that the appli-
ance is stable.
6. Remove the kettle from the base.
7. Press the "Unold" opening button
in the centre of the lid. The lid
is unlocked and opens automati-
cally.
Functions
The glass electronic kettle has two functions:
heating or boiling water
The water is warmed to the pre-set temperature. Thus you obtain lukewarm to
briskly boiling water, as desired. The temperature can be set in 10°C increments
between 60°C and 100°C.
The factory preset is 100°C.
Keeping warm
The previously boiled water is kept warm at the desired temperature after boiling/
heating. The temperature at which the water is kept warm can be set in 10°C
14
All manuals and user guides at all-guides.com
caution!
Do not open the lid while the
water is boiling. If the kettle
is overfilled, boiling water can
splash out.
the appliance becomes very
hot during operation!
Never open the housing or the
base of the appliance. there
is danger of electric shock.
8. Fill with clean, cold water to the
Max mark.
9. Close the lid by pressing lightly.
10. Place the kettle so it is straight on
the base, to ensure that contact is
established with the base.
11. Press the "
on the appliance.
12. When the water is boiling the
automatic boil dry circuit swit-
ches off the appliance.
13. For hygienic reasons, please dis-
card the water from the first boi-
ling.
" button to switch