Publicité
Les langues disponibles
Les langues disponibles
8654345
POWER TOOL PRECAUTIONS
WARNING! DO NOT use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous and
could cause an injury. A qualified technician must repair and verify the
power tool is operating correctly before it can be used.
1.
Do not allow the tool to run without load for an extended period of time, as
this will shorten its life.
2.
Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
3.
Avoid unintentional starting. Ensure the switch is off when connecting to
the power source.
4.
Disconnect the power source before installing or servicing the tool.
5.
After making adjustments, make sure that any adjustment devices are
securely tightened.
6.
Remove adjusting keys and wrenches before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool increases the risk
of personal injury.
7.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. If your tool runs
smoothly under no load, but does not run smoothly under load, then
excessive pressure is being used.
8.
Do not touch an operating motor. Motors can operate at high temperatures
and can cause a burn injury.
9.
Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
10. The drill is designed for indoor use only. Do not expose to wet conditions.
CUTTING TOOL PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic. When
working on materials that may contain lead, asbestos, copper chromium
arsenate or other toxic materials, extra care should be taken to avoid
inhalation and minimize skin contact.
6
12 in. Variable Speed Bench-Top Drill Press
For technical questions call 1-800-665-8685
V 4.0
Publicité
