Publicité
DEFAULT OPERATIVE PARAMETERS
During the run time, when the display
shows the measured value, it is possible to
load the default data for operative param-
eters.
When this action is desired, proceed as
follows:
Push L and M pushbutton at the same
time; the display will show "dF.OF"
Push the L pushbutton, the display will
show "dF.On".
Push F to load the default data; during the
loading procedure the display will show
"LOad".
DEFAULT OPERATIVE PARAMETER
A1
Alarm threshold 1 = low scale value
A2
Alarm threshold 2 = low scale value
A3
Alarm threshold 3 = low scale value
H1
Alarm 1 hysteresis = 0.1 %
H2
Alarm 2 hysteresis = 0.1 %
H3
Alarm 3 hysteresis = 0.1 %
Appendix A.2
2 rue René Laennec 51500 Taissy France
E-mail:hvssystem@hvssystem.com
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
Site web : www.hvssystem.com
Appendix A.3
Publicité
