WAGNER WALL EXTRA TEXTURE Mode D'emploi page 17

Texture spray attachment
Problem
No coating material
emerges from the nozzle
Pos. Designation
3 Nozzle seal (2 pcs.)
4 Nozzle
5 Air cap
6 Union nut
7 O-ring
8 Feather with cap
11 Container seal
12 Suction tube
13 Container 1300 ml with cover
14, 15, 16 Ventilating hose, valve cover, diaphragm
17 Feed hopper (3pcs.)
The CLICK&PAINT SYSTEM with additional spray attachments and accessories
offers the right tool for each work.
Further information about the WAGNER range of products for renovating is available
under www.wagner-group.com
Environmental protection
The device and all accessories and packaging have to be recycled in an
environmentally friendly manner. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system or disposed
of as household rubbish. It has to be disposed of separately as special waste. Please pay
special attention to the instructions on the product packaging.
Cause
•
Nozzle clogged
•
Feed tube clogged
•
Material volume setting
turned too far to the left
(-)
•
Feed tube loose
•
No pressure build-up in
container
•
Ventilating bore (Fig. 1, B)
clogged
Spare Parts List (Fig. 1/ A)
Remedy
➞ Clean
➞ Clean
➞ Turn to the right (+)
➞ Insert
➞ Tighten container
➞ Clean
Order No.
2304 433
2343 963
2343 965
2343 966
2362 875
2343 967
2328 919
2328 922
2305 155
2304 027
2304 028
GB
13