Publicité
Les langues disponibles
Les langues disponibles
GB
Before using the attachment, read these operating instructions and familiarise
yourself with the operating instructions for the basic unit. The safety instructions
for the basic unit apply to this Texture spray attachment.
The Texture spray attachment has been specially designed for applying fine plaster,
undercoats and sealing primer. A high feed rate and working speed are the main
features of this spray attachment.
For best results, the Texture spray attachment should only be used with
i
Wagner HVLP devices with a power output of 570 watts or higher.
1) Gun body
3) Nozzle seal
5) Air cap
7) O-Ring
9) Material quantity regulation
11) Container seal
13) Container
15) Valve cover
17) Feed hopper
Coating Materials Suitable for Use
Fine plaster (maximum grain size 1 mm), structured paint
Undercoats, sealing primer
Preparation of the workplace
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
Mask all the areas and objects that are not to be spray painted, or
remove them from the work area. No liability is assumed for damage
due to overspray.
Silicate paint corrodes glass and ceramic surfaces upon contact! All
such surfaces must therefore be completely covered.
8
Description (Fig. 1 / A)
2) Needle
4) Nozzle
6) Union nut
8) Feather with cap
10) Trigger
12) Suction tube
14) Ventilating hose
16) Diaphragm
Texture spray attachment
Publicité
