Napoleon MIRAGE 605 Manuel D'assemblage, D'utilisation Et D'entretien page 17

4 x N570-0088 (10-24 X 1/2")
Tool Peg Installation
Fasten the supplied tool pegs to the side of each side shelf using (2) 10-24 X 1/2" screws and (2) 1/4" washers.
8 x N570-0082 (1/4-20 X 5/8")
Side Shelf Installation
Insert (2) 1/4-20 x 5/8" screws through washers into the top holes in side of base, do not tighten all the way. Slide side shelf
over screw heads. Align bottom holes in side shelf with bottom holes in base, place remaining washers between side shelf and
base as shown. Insert remaining screws through side shelf into base and finish tighting all screws.
4 x N735-0007 (1/4")
8 x N735-0001 (insulated washer)
LEFT SHELF RIGHT SHELF
www.napoleongrills.com
17
3/8"(10mm)