Page 1
APPLY SERIAL NUMBER LABEL FROM CARTON Serial No. PG.17 XXXXXX000000 MODEL NO. DO NOT DISCARD MODULAR CABINET ASSEMBLY INSTRUCTIONS Use this manual in conjunction with your main manual to properly assemble your built-in grill. Refer to the main manual for operating, cleaning, and maintenance instructions. This grill is designed for NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a qualified installer to local codes.
Page 2
NAPOLEON. NAPOLEON warrants that components in your new NAPOLEON product will be free from defects in material and workmanship from the date of purchase, for the following period: Aluminum castings / stainless steel base ...........
Page 3
Each cabinet has 4 leveling feet for adjustment on even surfaces. The 2 drawer cabinets are made to fit the Napoleon BUILT-IN series of grills only, available in several different sizes. BUILT-IN grills come in several different sizes. Refer to the installation manuals that come with the grill head for proper installation and operating instructions.
Page 4
TOOLS REQUIRED FOR ASSEMBLY (tools not included) 3/8” (10mm) GAS AND ELECTRICAL PIPING The piping up to the gas grill is the responsibility of the installer and piping should be located as shown in the built-in instructions. Do not use hose to connect the unit. It must be connected with either rigid pipe, copper tube or an approved flexible metal connector.
Page 5
PROPANE SUPPLY HOSE ROUTING IM-UTC N105-0012 The gas connection of the LEX series grills is at the left of the control panel. Placing the tank enclosure cabinet to the left of the unit cabinet will make for easier gas piping. Knockouts have been punched in the sides and back panels to provide easy routing of gas or electrical piping.
Page 7
CABINET 45 DEGREE CONNECTION IM-45T N570-0086 CABINET 90 DEGREE CONNECTION IM-45T X 2 N570-0086 N415-0416 AUG 30.18 www.napoleongrills.com...
Page 8
CABINET END PANEL KIT IM-CEP N570-0086 CABINET END PANEL KIT IM-CEP / IM-WSF N570-0086 SHOWN WITH REAR PANEL REMOVED www.napoleongrills.com N415-0416 AUG 30.18...
Page 9
CABINET LEVELING PROCEDURE N415-0416 AUG 30.18 www.napoleongrills.com...
Page 10
COUNTERTOP TO BE FASTENED AS PER MANUFACTURER’S INSTRUCTIONS. HOLES HAVE BEEN PLACED ON THE TOP FLANGE OF THE SIDE PANELS TO ALLOW FOR FASTENERS. REFER TO BUILT-IN MANUAL THAT ACCOMPANIES THE GRILL FOR COMPLETE INSTRUCTIONS. GAS PIPING MUST BE DONE BY A LICENSED GAS INSTALLER. www.napoleongrills.com N415-0416 AUG 30.18...
DOOR REVERSAL N415-0416 AUG 30.18 www.napoleongrills.com...
Page 12
Part # Description IM-UDC N475-0223-CN1HR side panel / panneau avant N475-0224-CN1HR back panel / panneau arrière N570-0086 #14 x 1/2" screw / vis #14 x 1/2" N010-0575-CN1HR bottom shelf assembly / ensemble de tablette inférieur N570-0031 leveling foot / mise à niveau du pied N525-0018-CN1HR top/bottom rail / support superior/inférieur N105-0011...
Page 13
Part # Description IM-UTC-CE N475-0223-CN1HR side panel / panneau avant N475-0237-CN1HR back panel / panneau arrière N570-0086 screw , #14 x 1/2" / vis #14 x 1/2" N010-0575-CN1HR assembly, bottom shelf / ensemble de tablette inférieur N570-0031 leveling foot / mise à niveau du pied N525-0018-CN1HR top/bottom rail / support superior/inférieur N105-0011...
Page 14
Part # Description IM-WDC N010-0678-CN side panel / panneau avant N475-0224-CN1HR back panel / panneau arrière N525-0018-CN1HR top/bottom rail / support superior/inférieur N570-0086 #14 x 1/2" screw / vis #14 x 1/2" N555-0032 paper towel rod / tige pour essuie-tout N485-0012 cotter pin / vis N010-0576-CN1HR...
3. A concise description of the problem (‘broken’ is not sufficient). 4. Proof of purchase (photocopy of the invoice). In some cases, Napoleon could request to have the parts returned to the factory for inspection before providing replacement parts. Before contacting Napoleon dealer, please note that the following items are not covered by the warranty: •...
Page 16
Notes www.napoleongrills.com N415-0416 AUG 30.18...
APPOSEZ LÉTIQUETTE DU NUMERO DE SERIE DU CARTON de série XXXXXX000000 DE MODÈLE NE PAS JETER INSTRUCTIONS D’ASSEMBLAGE DES CABINETS MODULAIRES Afin d’assembler correctement votre gril encastré, veuillez vous référer à ce manuel ainsi qu’au manuel principal. Consultez ce dernier pour les instructions d’opération, de nettoyage et d’entretien. Ce gril convient uniquement à des cabinets INCOMBUSTIBLES et il doit être installé...
Page 18
Garantie limitée à vie de 10 ans du Président des Grils Napoléon Les produits NAPOLÉON sont conçus avec des composants et des matériaux de qualité supérieure, assemblés par des artisans qualifiés qui sont fiers de leur travail. Ce produit a été soigneusement inspecté par un technicien qualifié...
Page 19
PLANIFICATION DE VOTRE ÎLOT MODULAIRE EXTÉRIEUR NAPOLÉON La polyvalence est à la base de la conception de la série des Îlots modulaires extérieurs Napoléon. Pour convenir à vos besoins, la configuration des cabinets est presque illimitée. Les îlots peuvent être installés contre un mur de la maison ou comme îlot isolé, créant ainsi l’élément central de votre cour arrière.
OUTILS REQUIS POUR L’ASSEMBLAGE (outils non inclus) 3/8” (10mm) INSTALLATION DE L’ALIMENTATION ÉLECTRIQUE ET DE LA TUYAUTERIE POUR LE GAZ L’installateur est responsable d’acheminer la tuyauterie au gril à gaz. La tuyauterie devrait être installée comme montré dans le manuel du gril encastré. Ne pas utiliser de boyau pour brancher l’appareil. Le branchement doit être fait avec du tuyau rigide, du tuyau de cuivre ou un raccord métallique flexible approuvé.
IM-UTC ACHEMINEMENT DU BOYAU D’ALIMENTATION EN PROPANE N105-0012 Le branchement du gaz des grils Napoléon se trouve à la gauche du panneau de contrôle. Placer le cabinet pour réservoir de propane à gauche du cabinet pour gril simplifiera l’installation de la tuyauterie pour le gaz. Des plaques ont été...
Page 22
PANNEAU D’ATTCHE DE REFRIGERATEUR IM-FMP/FEP N570-0086 N105-0012 IM-FMP IM-FEP www.napoleongrills.com N415-0416 AUG 30.18...
Page 23
RACCORDEMENT DE CABINETS À 45 DEGRÉS IM-45T N570-0086 RACCORDEMENT DE CABINETS À 90 DEGRÉS IM-45T X 2 N570-0086 N415-0416 AUG 30.18 www.napoleongrills.com...
ENSEMBLE DE PANNEAU D’EXTRÉMITÉ IM-CEP N570-0086 ENSEMBLE DE PANNEAU D’EXTRÉMITÉ IM-CEP / IM-WSF N570-0086 ILLUSTRÉ SANS LE PANNEAU ARRIÈRE www.napoleongrills.com N415-0416 AUG 30.18...
MISE DE NIVEAU DU CABINET N415-0416 AUG 30.18 www.napoleongrills.com...
Page 26
FIXEZ LE COMPTOIR EN RESPECTANT LES DIRECTIVES DU FABRICANT. DES TROUS ONT ÉTÉ MÉNAGÉS DANS LE REBORD SUPÉRIEUR DES PANNEAUX LATÉRAUX POUR Y INSÉRER LES PIÈCES DE FIXATION. POUR DES DIRECTIVES COMPLÈTES, CONSULTEZ LE MANUEL QUI ACCOMPAGNE LE GRIL ENCASTRÉ.LA TUYAUTERIE POUR LE GAZ DOIT ÊTRE INSTALLÉE PAR UN INSTALLATEUR POUR LE GAZ AUTORISÉ.
Page 27
PORTE INVERSE N415-0416 AUG 30.18 www.napoleongrills.com...
Page 28
Part # Description IM-UDC N475-0223-CN1HR side panel / panneau avant N475-0224-CN1HR back panel / panneau arrière N570-0086 #14 x 1/2" screw / vis #14 x 1/2" N010-0575-CN1HR bottom shelf assembly / ensemble de tablette inférieur N570-0031 leveling foot / mise à niveau du pied N525-0018-CN1HR top/bottom rail / support superior/inférieur N105-0011...
Page 29
Part # Description IM-UTC-CE N475-0223-CN1HR side panel / panneau avant N475-0237-CN1HR back panel / panneau arrière N570-0086 screw , #14 x 1/2" / vis #14 x 1/2" N010-0575-CN1HR assembly, bottom shelf / ensemble de tablette inférieur N570-0031 leveling foot / mise à niveau du pied N525-0018-CN1HR top/bottom rail / support superior/inférieur N105-0011...
Page 30
Part # Description IM-WDC N010-0678-CN side panel / panneau avant N475-0224-CN1HR back panel / panneau arrière N525-0018-CN1HR top/bottom rail / support superior/inférieur N570-0086 #14 x 1/2" screw / vis #14 x 1/2" N555-0032 paper towel rod / tige pour essuie-tout N485-0012 cotter pin / vis N010-0576-CN1HR...
GARDEZ VOTRE REÇU COMME PREUVE D’ACHAT POUR VALIDER VOTRE Commande de pièces de rechange Information sur la garantie MODÈLE : DATE D’ACHAT : NUMÉRO DE SÉRIE : (Inscrivez l’information ici pour y avoir accès facilement.) Pour commander des pièces de rechange ou faire une réclamation sous garantie, communiquez avec le détaillant Napoléon où...
Page 32
Napoleon products are protected by one or more U.S. and Canadian and/or foreign patents or patents pending. Les produits de Napoléon sont protégés par un ou plusieurs brevets américains, canadiens et (ou) étrangers ou par des brevets en instance. N415-0416...