Setting the temperature
controls
This refrigerator is designed to operate at
a household temperature of 55° to 100° F
(13° to 43° C).
INITIAL TEMPERATURE
SETTINGS
Locate refrigerator and freezer controls
on upper-left wall of refrigerator section
and set both controls to 4.
IMPORTANT: Neither section will cool if
freezer control is set to OFF.
Adjusting the
temperature controls
MATERIALS NEEDED:
• 2 thermometers measure -5° to 50° F
(-21° to 10° C)
• 2 drinking glasses
IMPORTANT: Due to design of unit,
always start temperature adjustments
with freezer section.
FREEZER
Place thermometer in glass of veg-
etable oil in middle of freezer.
Allow 24 hours for temperatures to
stabilize.
Check to see if temperature is 0° to 2° F
(-17° to -16° C).
• Turn control to next highest number
if too warm.
• Turn control to next lowest number if
too cold.
• Allow 5 to 8 hours for adjustments to
take effect.
Repeat as necessary.
REFRIGERATOR
Place thermometer in glass of water in
middle of refrigerator.
Allow 24 hours for temperatures to
stabilize.
Check to see if temperature is 38° to
40° F (3° to 4° C).
• Turn control to next highest number
if too warm.
• Turn control to next lowest number if
too cold.
• Allow 5 to 8 hours for adjustments to
take effect.
Repeat as necessary.
6