Sherco 250 SE RACING Manuel page 97

CONTROL DEVICES AND CONTROLS
Fig 1 SPD function
Fig 2 MAX speed function
Fig 3 AVG function
Fig 4 DST function
Fig 5 DST2 function
SPD function Current speed (screens 1 and 2):
displays the current speed of the vehicle.
The speed can be displayed in km/h (default)
or mph. (p.99).
MAX speed (screen 3):
displays the maximum speed since the last reset was
performed. The maximum speed can be displayed in
km/h (default) or mph. ( p. 99).
Reset to 0 MAX Function
Button down for 3seconds
AVG function Average speed (screen 3):
displays the average speed of the vehicle since the
last reset was performed.
The average speed is displayed in the chosen units,
km/h (default) or mph. ( p.99).
Reset to 0 AVG Function
Button down for 3seconds
DST function (screen 1):
displays the mileage traveled by the vehicle since the
last reset was performed.
The distance is displayed in the selected units, km/h
(default) or mph. ( p.99).
Reset to 0 DST Function Hold the right.
Button down for 3seconds 0.0 Reset to 0 done.
DST2 function (screen 1):
displays the mileage traveled by the vehicle since the
last reset was performed.
The distance is displayed in the selected units, km/h
(default) or mph. ( p.99).
Reset to 0 DST2 Function Hold the right.
Button down for 3seconds 0.0 Reset to 0 done.
Hold the right
0 Reset to 0 done.
Hold the right.
0 Reset to 0 done.
97