Sherco 250 SE RACING Manuel page 119

ADJUSTING THE CHASSIS
REAR SHOCK KAYABA
CHANGING THE SHOCK SPRING
- Remove and clean the rear shock unit ( p.128).
Loosen the collar
1
Loosen / tighten the red plastic ring
on the length required.
Loosening
2
Indications
Tightening
- Tighten the collar
- Reinstall the shock ( p.128)
- Recheck the settings ( p.118)
- Remove and clean the rear shock unit ( p.128).
- Select and install a spring based on your weight.
- Reinstall the shock.
- Adjust the sag ( p.118).
- - Adjust the riding sag ( p.118).
Spring Rate
Rider Weight (with equipment): 65-75kg
Rider Weight (with equipment): 75-85kg
Rider Weight (with equipment): 85-95kg
.
1
Decreases the overall
one turn length by 4mm.
Increases the overall
one turn length by 4mm.
.
1
depending
2
KAYABA
44N/mm
46N/mm
48N/mm
119