Sherco 250 SE RACING Manuel page 136

BRAKES
REMOVING THE FRONT AND REAR BRAKE PADS
1
2
CHECKING THE CONDITION OF THE BRAKE PADS
A
REINSTALLING THE FRONT AND REAR BRAKE PADS
136
1
2
1
2
- Remove the clip and retaining pin
1
- Remove the brake pads.
Do not operate the front brake lever or rear brake
pedal when the brake pads are removed.
Check the pads for wear.
Minimum pad thickness
If replacement is necessary, always change the pads
in pairs.
Check if the brake discs are not contaminated with
oil or grease. In they are, clean the discs with brake
cleaner.
Brake cleaner
.
2
≥1mm
A
Motul ® P2 Brake Clean