Novoferm NovoZip Manual D'utilisation page 36

Semi-automatic function (push-to-lock operation)
By pressing the button panel or the remote control, the door opens and remains open indefinitely. To close, press
the button again. Whenever the door is closing and the button panel, remote control or any safety element (pho-
tocell, light curtain, etc.) is activated / pressed, the door will stop and reverse the manoeuvre for a time equal to
that of its closing.
EN
Automatic function (timed closing)
By pressing the stop button on the control panel or the remote control, the door opens and remains open until the
programmed waiting time elapses.
After this time the door will close, if the safety elements allow it.
• By pressing the stop button on the control panel or the remote control, the door opens and remains open
until the programmed waiting time elapses. After this time the door will close, if the safety elements allow it.
Alternative stop on opening
During the opening movement, if the button panel or remote control is pressed, the door stops. If pressed again,
the door closes or starts timing depending on the option programmed in the control panel.
34
This user manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
Figure 6.- OPENING
Figure 9.- OPENING
Figure 7.- STOP
Figure 10.- STOP
Figure 8.- CLOSING
Figure 11.- CLOSING