Belkin OmniView F1DE101HEA Manuel De L'utilisateur page 78

5-0 Troubleshooting Guide
The RIPM web pages are not displayed correctly.
Check your browser's cache settings. Make sure the cache settings are NOT
set to "never check for newer pages". Under that setting, the RIPM pages
could be loaded from your browser cache and not from the RIPM, which may
be causing the problem.
Windows XP does not awake from standby mode.
This is possibly a Windows XP problem. Try not to move the mouse pointer
while XP switches into standby mode. Please consult the OS manual for
additional information.
Every time I reopen the Remote Console dialog box, the mouse
pointers are no longer synchronous.
Disable the setting "Automatically move mouse pointer to the default button
of dialog boxes" in the mouse settings of your operating system.
The Remote Console remains black.
Check whether the RIPM is USB-powered only. If there is not enough power
via USB, the Remote Console opens but remains black. Verify the RIPM
settings on page 26 of this User Manual. Check that the video cables are
securely connected.
The video data on the local monitor is surrounded by a
black border.
This is not a failure. The local monitor is programmed to a fixed video mode
that can be selected in the video settings of the RIPM. Refer to the "Remote
Console Control Bar" section on page 23 of this User Manual.
I forgot my password. How can I reset the RIPM to factory
defaults?
You can use the serial interface. For a detailed description, see the
"Resetting the Remote IP Manager to Factory Settings" section on page 31 of
this User Manual.
Please check www.belkin.com for additional troubleshooting and a list of
hardware that is compatible with the RIPM.
Note: If any of these solutions do not remedy the situation, please call technical
support at 1-800-2BELKIN.
P75075ea_F1DE101Hea_man.indb 74
1
2
3
4
5
6
74
8/16/2006 11:33:30 AM