Belkin OmniView F1DE101HEA Manuel De L'utilisateur page 72

4-5 Device Settings
1b. SNMP Settings
Simple Mail Transfer Protocol (SMTP) Logging Enabled
With this option, the RIPM is able to send email to an address entered
into the email-address text field in Event Log Settings. These mails
contain the same description strings as the internal log file, and the
mail subject is filled with the event group of the occurred log event.
In order to use this log destination, you must specify an SMTP server
that is both reachable from the RIPM and needs no authentication
(<serverip>:<port>).
SNMP Logging Enabled
If this is activated, the RIPM sends an SNMP trap to a specified
IP address every time a log event occurs. If the receiver requires
a community string, you can set it in the appropriate field. Most of
the event traps contain only one descriptive string that contains all
information about the log event. Authentication and host power have
their own standard trap, which they automatically create and which
consists of several fields detailing information about the event. To
receive this SNMP trap, use any SNMP
trap listener.
2. Event Log Assignments
You may choose which actions of the RIPM will be saved in the log file.
Check the desired box(es) and click "Apply" to confirm your selection.
P75075ea_F1DE101Hea_man.indb 68
Menu Options
8/16/2006 11:33:27 AM
1
2
3
4
5
6
68