Installation Instructions; Tools And Parts; Location Requirements; Electrical Requirements - KitchenAid KBCA06XPBL01 Guide D'utilisation Et D'entretien

Tools and Parts

TOOLS NEEDED:
Gather the required tools and parts before starting installation.
⁷⁄₆₄" Allen wrench

Location Requirements

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
To ensure proper ventilation for your refrigerator, allow for a ¹/₄"
(0.64 cm) space on each side and at the top. When installing your
refrigerator next to a fixed wall, leave 2¹⁄₂" (6.35 cm) minimum
clearance on each side to allow for the door to swing open.
NOTE: Do not install the refrigerator near an oven, radiator, or
other heat source, nor in a location where the temperature will fall
below 55°F (13°C). For best performance, do not install the
refrigerator behind a cabinet door or block the base grille.
¹⁄₄
" (0.64 cm)
4

INSTALLATION INSTRUCTIONS

Phillips screwdriver
¹⁄₂
2 " (6.35 cm)

Electrical Requirements

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended grounding method
A 115 Volt, 60 Hz., AC only 15 or 20 amp fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, unplug refrigerator or disconnect power.